The fixed voltage power supply is useful in applications where an
adjustable output is not required. This supply is simple, but very
flexable as the voltage it outputs is dependant only on the regulator
and transformer you choose. The maximum output current is 1.5A.
 |
Schematic
|
Parts
|
Part
|
Total Qty.
|
Description
|
Substitutions
|
| C1 | 1 | 2200uF 35V Electrolytic Capacitor |
|
| C2, C4 | 2 | 0.1uF Ceramic Disc Capacitor |
|
| C3 | 1 | 10uF 35V Electrolytic Capacitor |
|
| D1, D2 | 2 | 1N4007 Silicon Diode |
|
| BR1 | 1 | 2A 30V Bridge Rectifier |
|
| U1 | 1 | Regulator (See Notes) |
|
| T1 | 1 | Transformer (See Notes) |
|
| S1 | 1 | SPST 2 Amp Switch |
|
| F1 | 1 | 2A 250V Fuse and Holder |
|
| MISC | 1 | Heatsink For U1, Line Cord, Case, Wire |
|
Notes
- Since this project operates from 120 (or 220, or 240, etc.) volts AC, it MUST be built inside a case.
- U1 will reauire a heatsink.
You will need to choose T1 and U1 to match the voltage you want. Use the table below as a reference.
|
Output Voltage
|
T1
|
U1
|
| 5V | 6V, 1.5A | 7805 |
| 6V | 6V, 1.5A | 7806 |
| 9V | 12V, 1.5A | 7809 |
| 12V | 12V, 1.5A | 7812 |
| 15V | 24V, 1.5A | 7815 |
| 18V | 24V, 1.5A | 7818 |
No comments:
Post a Comment